ZyXEL Communications XGS2210-28 User Manual page 327

Figure 249 Advanced Application > Errdisable > CPU protection (Stacking mode)
The following table describes the labels in this screen.
Table 143 Advanced Application > Errdisable > CPU protection
LABEL DESCRIPTION
Reason Select the type of control packet you want to configure here.
Slot (Stacking This field appears only in stacking mode. Click the drop-down list to choose the slot number of
mode) the Switch in a stack.
Port This field displays the port number. In stacking mode, the first number is the slot ID and the
(Standalone or second is the port number. * means all ports.
stacking mode)
* Use this row to make the setting the same for all ports. Use this row first and then make
adjustments to each port if necessary.
Changes in this row are copied to all the ports as soon as you make them.
Rate Limit (pkt/s) Enter a number from 0 to 256 to specify how many control packets this port can receive or
transmit per second.
0 means no rate limit.
You can configure the action that the Switch takes when the limit is exceeded. See
on page 328
Chapter 31 Error Disable
for detailed information.
XGS2210 Series User's Guide
327
Section 31.5