Ipv6 Prefix Setup - ZyXEL Communications XGS2210-28 User Manual

Table 32 Basic Setting > IPv6 > IPv6 Configuration > IPv6 Router Discovery Setup (continued)
LABEL
Suppress
Apply
Cancel
Clear
Index
Interface
Flags
Minimum Interval
Maximum Interval
Lifetime
Suppress

8.10.9 IPv6 Prefix Setup

Use this screen to configure the Switch's IPv6 prefix list for each interface. Click the link next to IPv6 Prefix
Setup in the IPv6 Configuration screen to display the screen as shown next.
Figure 73 Basic Setting > IPv6 > IPv6 Configuration > IPv6 Prefix Setup
Chapter 8 Basic Setting
DESCRIPTION
Select this option to set the Switch to not send router advertisements and responses to
router solicitations on this interface.
Click Apply to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the nonvolatile memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
Click Clear to reset the fields to the factory defaults.
This is the interface index number. Click on an index number to change the settings.
This is the name of the IPv6 interface you created.
This field displays whether IPv6 hosts use DHCPv6 to obtain IPv6 stateful addresses (M) and/
or additional configuration settings (O).
This field displays the minimum time interval at which the Switch sends router
advertisements for this interface.
This field displays the maximum time interval at which the Switch sends router
advertisements for this interface.
This field displays how long the router in router advertisements can be used as a default
router for this interface.
This field displays whether the Switch sends router advertisements and responses to router
solicitations on this interface (No) or not (Yes).
XGS2210 Series User's Guide
95