Anti-Arpscan Configure - ZyXEL Communications XGS2210-28 User Manual

Table 164 Advanced Application > Anti-Arpscan > Trust Host (continued)
LABEL
Clear
Index
Name
Host IP
Mask
Delete
Cancel

36.5 Anti-Arpscan Configure

Use this screen to enable Anti-Arpscan, set port and host thresholds as well as configure ports to be
trusted or untrusted. To open this screen, click Advanced Application > Anti-Arpscan > Configure.
Figure 287 Advanced Application > Anti-Arpscan > Configure (Standalone mode)
Chapter 36 Anti-Arpscan
DESCRIPTION
Click this to clear the fields above.
This field displays a sequential number for each trusted host.
This field displays the name of the trusted host.
This field displays the IP address of the trusted host.
This field displays the subnet mask of the trusted host.
Select an entry's check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Select an entry checkbox and click Delete to remove the specified entry.
Click this to clear the check boxes above.
XGS2210 Series User's Guide
373