ZyXEL Communications XGS2210-28 User Manual page 173

Figure 135 Advanced Application > Broadcast Storm Control (Stacking mode)
The following table describes the labels in this screen.
Table 67 Advanced Application > Broadcast Storm Control
LABEL DESCRIPTION
Active Select this check box to enable traffic storm control on the Switch. Clear this check box to
disable this feature.
Slot (Stacking This field appears only in stacking mode. Click the drop-down list to choose the slot number of
mode) the Switch in a stack.
Port (Standalone This field displays the port number. In stacking mode, the first number is the slot ID and the
or stacking second is the port number. * means all ports.
mode)
* Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row first to set
the common settings and then make adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
Broadcast (pkt/s) Select this option and specify how many broadcast packets the port receives per second.
Multicast (pkt/s) Select this option and specify how many multicast packets the port receives per second.
DLF (pkt/s) Select this option and specify how many destination lookup failure (DLF) packets the port
receives per second.
Chapter 15 Broadcast Storm Control
XGS2210 Series User's Guide
173