Multicast Setup; Ipv4 Multicast Status; Igmp Snooping - ZyXEL Communications XGS2210-28 User Manual

24.2 Multicast Setup

Use this screen to configure IGMP for IPv4 or MLD for IPv6 and set up multicast VLANs. Click Advanced
Application > Multicast in the navigation panel.
Figure 169 Advanced Application > Multicast Setup
The following table describes the labels in this screen.
Table 88 Advanced Application > Multicast Setup
LABEL
IPv4 Multicast
IPv6 Multicast
MVR

24.3 IPv4 Multicast Status

Click Advanced Application > Multicast > IPv4 Multicast to display the screen as shown. This screen
shows the IPv4 multicast group information. See
multicasting.
Figure 170 Advanced Application > Multicast > IPv4 Multicast
The following table describes the labels in this screen.
Table 89 Advanced Application > Multicast > IPv4 Multicast
LABEL
Index
VID
Port
Multicast Group

24.3.1 IGMP Snooping

Click the IGMP Snooping link in the Advanced Application > Multicast > IPv4 Multicast screen to display
the screen as shown. See
Chapter 24 Multicast
DESCRIPTION
Click the link to open screens where you can configure IGMP snooping and IGMP filtering for
IPv4.
Click the link to open screens where you can configure MLD snooping-proxy and MLD filtering
for IPv6.
Click the link to open screens where you can create multicast VLANs.
DESCRIPTION
This is the index number of the entry.
This field displays the multicast VLAN ID.
This field displays the port number that belongs to the multicast group.
This field displays IP multicast group addresses.
Section 24.1 on page 223
XGS2210 Series User's Guide
227
Section 24.1 on page 223
for more information on multicasting.
for more information on