Static Mac Forward Setup; Overview; What You Can Do; Configuring Static Mac Forwarding - ZyXEL Communications XGS2210-28 User Manual

Static MAC Forward Setup

10.1 Overview

This chapter discusses how to configure forwarding rules based on MAC addresses of devices on your
network.
Use these screens to configure static MAC address forwarding.

10.1.1 What You Can Do

Use the Static MAC Forwarding screen
port.

10.2 Configuring Static MAC Forwarding

A static MAC address is an address that has been manually entered in the MAC address table. Static
MAC addresses do not age out. When you set up static MAC address rules, you are setting static MAC
addresses for a port. This may reduce the need for broadcasting.
Static MAC address forwarding together with port security allow only computers in the MAC address
table on a port to access the Switch. See
Click Advanced Application > Static MAC Forwarding in the navigation panel to display the
configuration screen as shown.
Chapter 10 Static MAC Forward Setup
(Section 10.2 on page
Chapter 19 on page 199
XGS2210 Series User's Guide
131
C
H A P T E R
131) to assign static MAC addresses for a
for more information on port security.
10