Gui-Based Ftp Clients; Ftp Restrictions - ZyXEL Communications XGS2210-28 User Manual

44.10.4 GUI-based FTP Clients

The following table describes some of the commands that you may see in GUI-based FTP clients.
General Commands for GUI-based FTP Clients
COMMAND
Host Address
Login Type
Transfer Type
Initial Remote Directory
Initial Local Directory

44.10.5 FTP Restrictions

FTP will not work when:
• FTP service is disabled in the Service Access Control screen.
• The IP address(es) in the Remote Management screen does not match the client IP address. If it does
not match, the Switch will disconnect the FTP session immediately.
Chapter 44 Maintenance
DESCRIPTION
Enter the address of the host server.
Anonymous.
This is when a user I.D. and password is automatically supplied to the server for
anonymous access. Anonymous logins will work only if your ISP or service administrator
has enabled this option.
Normal.
The server requires a unique User ID and Password to login.
Transfer files in either ASCII (plain text format) or in binary mode. Configuration and
firmware files should be transferred in binary mode.
Specify the default remote directory (path).
Specify the default local directory (path).
XGS2210 Series User's Guide
435