Change Your Password; Saving Your Configuration; Switch Lockout - ZyXEL Communications XGS2210-28 User Manual

4.3.1 Change Your Password

After you log in for the first time, it is recommended you change the default administrator password.
Click Management > Access Control > Logins to display the next screen.
Figure 24 Change Administrator Login Password

4.4 Saving Your Configuration

When you are done modifying the settings in a screen, click Apply to save your changes back to the
run-time memory. Settings in the run-time memory are lost when the Switch's power is turned off.
Click the Save link in the upper right hand corner of the web configurator to save your configuration to
nonvolatile memory. Nonvolatile memory refers to the Switch's storage that remains even if the Switch's
power is turned off.
Note: Use the Save link when you are done with a configuration session.

4.5 Switch Lockout

You could block yourself (and all others) from managing the Switch if you do one of the following:
Delete the management VLAN (default is VLAN 1).
1
Delete all port-based VLANs with the CPU port as a member. The "CPU port" is the management port of
2
the Switch.
Filter all traffic to the CPU port.
3
Disable all ports.
4
Misconfigure the text configuration file.
5
Chapter 4 The Web Configurator
XGS2210 Series User's Guide
42