Zyxel One Network (Zon) Utility Screen - ZyXEL Communications XGS2210-28 User Manual

Table 9 Status (continued)
LABEL
IP Address Information
IPv4 Address
Subnet Mask
Default
Gateway
IP Setup
IPV6 Global
Unicast Address
IPV6 Link-Local
Address
IPv6
configuration
Device Status
and Quick
Configuration
Quick Links

7.3 Zyxel One Network (ZON) Utility Screen

ZON Utility is a program designed to help you deploy and manage a network more efficiently. It detects
devices automatically and allows you to do basic settings on devices in the network without having to
be near it.
The ZON Utility issues requests via Zyxel Discovery Protocol (ZDP) and in response to the query, the device
responds back with basic information including IP address, firmware version, location, system and model
name in the same broadcast domain. The information is then displayed in the ZON Utility screen and you
can perform tasks like basic configuration of the devices and batch firmware upgrade in it. You can
download the ZON Utility at www.zyxel.com and install it on a PC.
The following figure shows the ZON Utility screen.
Chapter 7 Status and ZON
DESCRIPTION
This field displays the Switch's current IPv4 address.
This field displays the Switch's subnet mask.
This field displays the IP address of the Switch's default gateway.
Click the link to go to the Basic Setting > IP Setup screen.
This field displays the Switch's IPv6 global unicast address
This field displays the Switch's IPv6 link-local address.
Click the link to go to the Basic Setting > IPv6 screen.
This section shows whether a feature is enabled or not on the Switch. You can click a feature's
Setting link to go to the configuration screen for the feature.
Hover your cursor over a red exclamation mark to display information about the feature.
Note: The Stacking Status field is displayed only on the Switch with stacking support.
This section provides the shortcut link to a specific cofiguration screen.
XGS2210 Series User's Guide
60