Anti-Arpscan Configure - ZyXEL Communications GS2220 Series User Manual

The following table describes the fields in the above screen.
Table 174 Advanced Application > Anti-Arpscan > Trust Host
L ABEL
Name
Host IP
Mask
Add
Cancel
Clear
Index
Name
Host IP
Mask
Delete
Cancel
37.5 Anti- Arpsc a n C o nfig ure
Use this screen to enable
trusted or untrusted. To open this screen, click
Fig ure 260
DESC RIPT IO N
Type a descriptive name of up to 32 printable ASCII characters to identify this host.
Type the IP address of the host.
A trusted host may consist of a subnet of IP addresses. Type a subnet mask to create a
single host or a subnet of hosts.
Click this to create the trusted host.
Click this to reset the values above.
Click this to clear the fields above.
This field displays a sequential number for each trusted host.
This field displays the name of the trusted host.
This field displays the IP address of the trusted host.
This field displays the subnet mask of the trusted host.
Select an entry's check box to select a specific entry. Otherwise, select the check box in
the table heading row to select all entries.
Select an entry check box and click
Click this to clear the check boxes above.
Anti- Arpsc a n
Advanced Application > Anti-Arpscan > Configure
GS2220 Series User's Guide
to remove the specified entry.
De le te
, set port and host thresholds as well as configure ports to be
Adva nc e d Applic a tio n
342
> >
Anti- Arpsc a n C o nfig ure
.