Mvr Configuration Example; Figure 75 Mvr Configuration Example; Figure 76 Mvr Configuration Example - ZyXEL Communications ES-2724 User Manual

22.7.1 MVR Configuration Example

The following figure shows a network example where ports 1, 2 and 3 on the switch belong to
VLAN 1. In addition, port 7 belongs to the multicast group with VID 200 to receive multicast
traffic (the News and Movie channels) from the remote streaming media server, S. Computers
A, B and C in VLAN are able to receive the traffic.

Figure 75 MVR Configuration Example

To configure the MVR settings on the switch, create a multicast group in the MVR screen and
set the receiver and source ports.

Figure 76 MVR Configuration Example

To set the switch to forward the multicast group traffic to the subscribers, configure multicast
group settings in the Group Configuration screen. The following figure shows an example
where two multicast groups (News and Movie) are configured for the multicast VLAN 200.
Chapter 22 Multicast
ES-2724 User's Guide
167