Static Mac Forward Setup; Overview; Configuring Static Mac Forwarding - ZyXEL Communications XS3800-28 User Manual

Static MAC Forward Setup

Use these screens to configure static MAC address forwarding.

10.1 Overview

This chapter discusses how to configure forwarding rules based on MAC addresses of devices on your
network.

10.2 Configuring Static MAC Forwarding

A static MAC address is an address that has been manually entered in the MAC address table. Static
MAC addresses do not age out. When you set up static MAC address rules, you are setting static MAC
addresses for a port. This may reduce the need for broadcasting.
Static MAC address forwarding together with port security allows only computers in the MAC address
table on a port to access the Switch. See
Click Advanced Application > Static MAC Forwarding in the navigation panel to display the
configuration screen as shown.
Figure 110 Advanced Application > Static MAC Forwarding (Standalone Mode)
C
Chapter 20 on page 225
XS3800-28 User's Guide
143
H A P T E R
for more information on port security.
10