Static MAC Forward Setup
10.1 Overview
This chapter discusses how to configure forwarding rules based on MAC addresses of devices on your
network.
Use these screens to configure static MAC address forwarding.
10.1.1 What You Can Do
Use the Static MAC Forwarding screen
port.
10.2 Configuring Static MAC Forwarding
A static MAC address is an address that has been manually entered in the MAC address table. Static
MAC addresses do not age out. When you set up static MAC address rules, you are setting static MAC
addresses for a port. This may reduce the need for broadcasting.
Static MAC address forwarding together with port security allow only computers in the MAC address
table on a port to access the Switch. See
Click Advanced Application > Static MAC Forwarding in the navigation panel to display the
configuration screen as shown.
Figure 96 Advanced Application > Static MAC Forwarding
C
(Section 10.2 on page
Chapter 19 on page 175
XS1930 Series User's Guide
129
H A P T E R
129) to assign static MAC addresses for a
for more information on port security.
10