Setting-History Log - Siemens 7SJ82 Manual

[scdiu1u2-280415-01, 1, en_US]
Figure 3-11
3.1.5.6

Setting-History Log

All individual setting changes and the downloaded files of entire parameter sets are recorded in the log for
parameter changes. This enables you to determine setting changes made are associated with events logged
(for example, faults). On the other hand, it is possible to prove with fault analyses, for example, that the
current status of all settings truly corresponds to their status at the time of the fault. Up to 200 indications can
be stored in the setting-history log.
Reading from the PC with DIGSI 5
•
To reach the log for setting changes of your SIPROTEC 5 device, use the project-tree window.
Project → Device → Process Data → Log → Setting changes
The status of the setting-history log last loaded from the device is shown to you.
•
To update (synchronization with the device), click the Read log entries button in the headline of the
indication list
[scparamd-030211-01, 1, en_US]
Figure 3-12
SIPROTEC 5, Overcurrent Protection, Manual
C53000-G5040-C017-8, Edition 07.2017
Indication Configuration in DIGSI 5 (Example: User-Defined Log U1/2)
(Figure 3-12).
Reading the Setting-History Log with DIGSI 5
System Functions
3.1 Indications
75