Function-Group Types
5.6 Function-Group Type Analog Units
[scautcp2-220114-01-DE, 1, en_US]
Figure 5-69
This protocol is also available for Port J of the integrated Ethernet interface of the base module (refer to
following figure).
[scautcp3-220114-01-DE, 1, en_US]
Figure 5-70
With the selection of the SUP protocol for the RTD unit, DIGSI automatically adds the Analog units function
group and the RTD unit Ether. function to your device configuration (refer to the following figure).
274
SUP Ethernet Protocol Activation
SUP Ethernet Protocol Activation (base module)
SIPROTEC 5, Overcurrent Protection, Manual
C53000-G5040-C017-8, Edition 07.2017