Power Off - Humminbird Trolling Motor 360 Imaging Installation Manual

Power Off

WARNING! When the boat is stored or at dock, the 360 Imaging transducer must
be turned off to prevent draining the battery.
Power off the Control Head
1. Press and hold the POWER/LIGHT key.
CAUTION! Turning off the control head will NOT power off the 360 Imaging
transducer.
2. Turn off power on the main switch, breaker, or battery switch.
Powering off the 360 Imaging transducer will be determined by the
installation and power connection on your boat.
Travel with the Pod Installed
1. Confirm the Depth Collar Knob is fully tightened (by hand).
2. The pod must not hit the trolling motor shaft, base, or any objects. This is also
critical during transport or when the trolling motor is stowed. Check the
stability of the trolling motor bracket after initial use and periodically
thereafter to ensure that the installation and lock remain stable.
For measurement requirements, see Install the Trolling Motor Bracket.
45 Powering Off