Introduction - Humminbird Trolling Motor 360 Imaging Installation Manual

Introduction

This manual will guide you through the following installation requirements for the
Trolling Motor 360 Imaging:
Installing the GPS Receiver/Heading Sensor
Installing the Trolling Motor Bracket
Connecting to the Control Head and Power
Testing the Installation
Powering Off
Before proceeding with this installation, the Humminbird control head
and Minn Kota trolling motor should be installed. The 360 Imaging
transducer can be connected directly to the control head or to a
Humminbird Ethernet Switch (optional) for networking. See the Ethernet
Switch accessory guide to install the Ethernet Switch.
Compatibility
The AS 360 TM Ultrex is compatible with the Minn Kota Ultrex.
The AS 360 TM is compatible with the Minn Kota Fortrex and the Minn Kota
Maxxum.
1 Introduction