Fortrex/Maxxum Trolling Motor Mount (As 360 Tm) - Humminbird Trolling Motor 360 Imaging Installation Manual

B. Fortrex/Maxxum Trolling Motor Mount (AS 360 TM)
WARNING! Disconnect the motor from all sources of electrical power before you
start installation.
WARNING! Confirm that the trolling motor is properly secured to the boat and will
not shift during the installation.
The trolling motor should be in the fully retracted (flat) position on the boat deck
for this installation.
1. Align the bracket below the BowGuard and slightly above the collar. Close
the bracket, but do NOT lock it.
2. Route the cables and pod shaft up through the smaller hole on the trolling
motor bracket.
Aligning the Bracket
bracket
collar
close the
bracket but
BowGuard
do not lock it
27
Routing the Cables and Pod Shaft
shaft
pod
AS 360 TM