Humminbird Trolling Motor 360 Imaging Installation Manual page 36

6. Use an Allen wrench to install the (2) 10-32 x 5/8" hex socket bolts on the
bracket where the pod shaft is installed (see the illustration Securing the
Pod).
Tighten the bolts so the pod shaft is fully secure and won't drop when it
is deployed in the next step. Hand-tighten only!
7. Deploy the Trolling Motor.
Positioning the Bracket
bracket
lock
screws
to adjust lock
tension
(optional)
pivot the bracket
to adjust the pod
safety distance
AS 360 TM
Securing the Pod
pod
shaft
30
trolling motor
shaft
hand-tighten
(2) hex socket
bolts 10-32 x 5/8"