Humminbird Trolling Motor 360 Imaging Installation Manual page 35

4. Pivot the bracket until the pod is at least 2" (50.8 mm) from the lift assist
base and at least 1/2" (13 mm) from the trolling motor shaft. See the
illustration Measuring the Safety Distance of the Pod and Positioning the
Bracket.
WARNING! The pod must not hit the trolling motor shaft, lift assist base, or any
objects. These measurements are also critical during transport when the pod is stowed
with the trolling motor.
5. Close the bracket lock.
NOTE: For a secure installation, it should take significant force to lock down the
bracket. The bracket lock can be tightened by adjusting the tightness of the screws (see
the illustration Positioning the Bracket). If you adjust the screws, make sure you
adjust each screw equally.
Measuring the Safety Distance of the Pod
1/2" (13 mm) Minimum
from pod to trolling motor shaft
lift assist base
29
2" (50.8 mm)
Minimum
from pod to
lift assist base
AS 360 TM