Table of Contents
Advertisement
Installing the Portable Case On the Boat
Since the portable case has a large non-skid mounting surface, it may be attached
to almost any surface.
In this section, you will route the cables on the boat, connect the transducer and
power cables to the portable case, and attach the portable case to a dry and
convenient location on your boat.
1.
Connecting the Transducer and Power Cables
to the Portable Case
1. Make sure the large opening in the front of the portable case is
unzipped; you may want to roll up the flap and secure it with the
provided strap and clip while you're working.
2. Plug the transducer cable into the jumper port in the portable case to the
left of the control head, as you face the front of the bag (see the
illustration Plugging in the Transducer).
Plugging in the Transducer
12
Advertisement
Table of Contents
