Humminbird Trolling Motor 360 Imaging Installation Manual page 49

4. Press the RIGHT or LEFT Cursor keys to set the distance between the
360 Imaging transducer and the GPS Receiver/Heading Sensor.
NOTE: The Boat Icon must be set to On for the 360 Offset Icon to be displayed.
360 View with the 360 Offset Icon and Cursor
Boat Icon represents the 360 Imaging transducer position
A
Cursor Position: Located halfway between the 360 Imaging transducer and the
B
GPS/Heading Sensor on the display, on the right side of the boat (allows you to
interpret where to cast).
360 Offset Icon represents the GPS Receiver/Heading Sensor position
C
43
A
B
C
Control Head Setup