Support Command Lists - Fuji Electric FRENIC-AQUA series User Manual

6.5

Support Command Lists

Access to a Metasys system uses commands. In the support command lists given below, the
FRENIC-HVAC/AQUA supports commands that respond with ACK.
Support Command List 1
Synch Time
Read Memory
Poll Without ACK
Poll With ACK
Warm Start
Status Update Request
Read Analog Input
(Object Configuration)
Read Analog Input
(Object status & Value)
Read Analog Input
(Value)
Read Analog Input
Read Analog Input
(Low Alarm Limit)
Read Analog Input
(Low Warning Limit)
Read Analog Input (High
Warning Limit)
Read Analog Input (High
Alarm Limit)
Read Analog Input
(Differential)
Read Analog Input
Read Binary Input
(Object Configuration)
Read Binary Input
(Object status)
Read Binary Input
*1 Device manufacturing model number = M23 + M24 + M2 + "0000", Days in service = M20,
Device status = "0000" .
0 0 - -
0 1 - -
0 4 - -
0 5 - -
0 8 - -
0 9 - -
1 - 1 0-6
1 - 1 0-6
1 - 1 0-6
1 - 1 0-6
1 - 1 0-6
1 - 1 0-6
1 - 1 0-6
1 - 1 0-6
1 - 1 0-6
1 - 1 0-6
1 - 2 0-17
1 - 2 0-17
1 - 2 0-17
6-6
- - ACK
- - NAK 01
- - ACK
- - ACK
- - NAK 01
- - ACK
1 Byte ACK
2 Byte ACK
Float
3 Float ACK
4-7 - NAK 11
8 Float ACK
9 Float ACK
10 Float ACK
11 Float ACK
12 Float ACK
13-14 Float NAK 11
1 Byte ACK
2 Byte ACK
3-4 - NAK 11
No action.
See *1