Fuji Electric FRENIC-AQUA series User Manual page 22

(2) Connection with the inverter support software FRENIC Loader (computer) (when
connecting with the USB port via a recommended converter)
Converter: USB-485I, RJ45-T4P (Refer to Section 2.2.3 "Connection devices.")
Cable 1: USB cable supplied with the converter
Cable 2: extension cable for remote operations (CB-5S, CB-3S, or CB-1S) or commercial
LAN cable
The inverter can be also connected with FRENIC Loader using the USB port provided on the
inverter's control circuit board.
Figure 2.2 Connection with a computer
2-7
2.2 Connections