Fuji Electric FRENIC-AQUA series User Manual page 162

Data format [74]
Integer data (positive): by 10 hours
(Example) M81 (Maintenance remaining hours-M1) = 12340 hours
12340 ÷10 =04D2 Consequently
H
Data format [75]
Integer data (positive) + [P] Exception for position control
Based on the positive integer data, setting of "-1" is permitted exceptionally. When "-1" is set on
the touch probe or the loader, [P] is displayed.
Data format [76]
Operating status 2
15 14 13 12
Drive Reserved Reserved Reserved Reserved Reserved Reserved Rotation
motor
type
Signal name
Control system Indicates the final control system including set values and
terminal conditions.
0: V/f control without slip compensation
1: Dynamic torque-vector control
2: V/f control with slip compensation
3: V/f control with speed sensor
4: Dynamic torque-vector control with speed sensor
5: Vector control without speed sensor
6: Vector control with speed sensor
10: Torque control (vector control without speed sensor)
11: Torque control (vector control with speed sensor)
Other than the above: Reserved
Motor selected Indicates the currently selected motor number.
00 : Motor 1
b
01 : Motor 2
b
10 : Motor 3
b
11 : Motor 4
b
Speed limit ON "1" is set during speed limit.
Drive motor 0 : Induction motor (IM)
type
1 : Permanent magnet synchronous motor (PMSM)
=>
11 10 9 8
direction
limited
Description
5-75
5.2 Data Formats
04 D2
H H
7 6 5 4 3
Speed Reserved Motor Control system
limit selected
ON
(Reserved bits should be always "0.")
HVAC
×
×
2 1 0
AQUA
×
×