Fuji Electric FRENIC-AQUA series User Manual page 104

Table 5.12 Keypad-related function code (W codes) (Continued)
Code Name
W28 Operation command
source
W29 Frequency and PID
command source
W30 Speed set value at
percentage
W31 Speed set value at
percentage
W32 PID output
W33 Analog input monitor
*1 Operation command source code
Indicates the current source of operation commands.
Code
0 Run by the keypad
(rotation direction: depends on the terminal input)
1 Run by the terminals
2 Run by the keypad (forward rotation)
3 Run by the keypad (reverse rotation)
4 Run command 2 (when FR2/FR1 is ON)
5 Forced operation (Fire mode)
20 Port 1 (RS-485 channel 1) (Note)
21 Port 2 (RS-485 channel 2) (Note)
22 Bus option
23 Loader
5.1 Communications Dedicated Function Codes
Monitor range Min step
0 to 23 1
0 to 39 1
0.00 to 100.00 0.01
0.00 to 100.00 0.01
-150.0 to 150.0 0.1
-999 to 9990 Variable
Description
5-17
Support
Unit Remarks
HVAC/AQUA
−
*1
−
*2
%
%
% PID output
expressed by a
percentage with
setting the
maximum
frequency (F03)
to 100%
− Inverter's
analog input
converted by
E40 and E41
HVAC/AQUA
×