Monitor Data 1 - Fuji Electric FRENIC-AQUA series User Manual

5.1.3

Monitor data 1

Function codes for monitor data 1 (M codes) are described in the four tables (1 to 4) below.
These function codes are for reading only.
These function codes are for reading only. The "Support" column of the table indicates whether
each function is supported by the respective models or not. ○ indicates the function is supported,
and × indicates the function is not supported.
Code Name
M01 Frequency
reference (p.u.)
(Final command)
M02 Torque command
(Final command)
M03 Torque current
command
(Final command)
M04 Flux command
M05 Frequency
reference
(Final command)
M06 Output frequency 1
(p.u.)
M07 Torque real value
M08 Torque current
M09 Output frequency
M10 Input power
M11 Output current
effective value
M12 Output voltage
effective value
*1 Since M12 does not have any data after the decimal point, the minimum step is 1.0.
5.1 Communications Dedicated Function Codes
Table 5.8 Monitor data 1 function codes (1)
Description
Frequency -32768 to 32767
command based on
(±20,000 = maximum
the maximum
frequency)
frequency
Torque command -327.68 to 327.67
based on the motor
rated torque (100%)
Torque current -327.68 to 327.67
command based on
the motor rated
torque current
(100%)
Flux command -327.68 to 327.67
based on the rated
motor flux (100%)
Frequency 0.00 to 655.35
command with min.
step 0.01 Hz
Output frequency -32768 to 32767
based on the
(±20,000 = maximum
maximum frequency
frequency)
(before slip
compensation)
Motor output torque -327.68 to 327.67
based on the motor's
rated torque (100%)
Torque current -327.68 to 327.67
based on the rated
torque current of the
motor (100%)
Output frequency FGI:
with min. step 0.01 -655.35 to 655.35
Hz RTU:
0.00 to 655.35
Power consumption 0.00 to 399.99
value based on the
"nominal applicable
motor output"
(100%)
Output current 0.00 to 399.99
effective value based (100% = inverter
on the inverter rated rated current)
current
Output voltage 0.0 to 1000.0
effective value
(min. step: 1.0 V)
5-11
Min.
Monitor range
step
1
0.01
0.01
0.01
0.01
1
0.01
0.01
0.01
0.01
0.01
0.1
*1
Support
Unit
HVAC/AQUA
−
×
%
×
%
×
%
Hz
−
%
×
%
Hz
%
%
V