Communications Dedicated Function Codes - Fuji Electric FRENIC-AQUA series User Manual

5.1

Communications Dedicated Function Codes

5.1.1 About communications dedicated function codes
Communications dedicated function codes are available to monitor the operation and status of
the inverter via communications. They are classified into the groups shown in Table 5.1 below:
Table 5.1 Types of communications dedicated function codes
Communications dedicated
function code group
S
M
W
W1
W2
W3
X
X1
Z
The sections that follow describe communications dedicated function codes of each group.
5.1 Communications Dedicated Function Codes
Function
Command data
Monitor data 1 (for reading only)
Monitor data 2 (for reading only)
Monitor data 3 (for reading only)
Monitor data 4 (for reading only)
Monitor data 5 (for reading only)
Alarm information (for reading only)
5-1