Distance Unit; Language; Set Sensors; Clock Setting - MARUTI SUZUKI S-Cross Owner's Manual

Distance unit

(Odometer/tripmeter distance units set-
ting)
You can change the units in which odome-
ter/tripmeter distance is displayed in.
Fuel economy
(Fuel consumption units setting)
You can change the units that fuel con-
sumption is displayed in.

Language

You can change the language of the infor-
mation display.
Fuel reset (Average fuel consumption
reset setting)
You can change when the value of aver-
age fuel consumption is reset.
Temperature
(Temperature units setting)
You can change the units that temperature
is displayed in.
NOTE:
When you change the units that tempera-
ture is displayed in, the automatic heating
and air conditioning system (if equipped)
temperature display units will be changed
automatically.

Set Sensors

(Parking sensors (if equipped) setting)
The parking sensor can be switched
between the normal mode and trailer
mode.

Clock setting

• To change the hour indication, turn the
indicator selector knob (2) left or right
repeatedly when the hour indication
appears as reversed color. To change
the hour indication quickly, turn and hold
the indicator selector knob (2). To set the
hour indication, push the indicator selec-
tor knob (2) and the minute indication
appears as reversed color.
• To change the minute indication, turn the
indicator selector knob (2) left or right
repeatedly when the minute indication
appears as reversed color. To change
the minute indication quickly, turn and
hold the indicator selector knob (2). To
set the minute indication, push the indi-
cator selector knob (2).
You can also switch the time indication
between 12-hour and 24-hour format.
BEFORE DRIVING
Door Lock (Door lock setting)
• Door Unlock
– All Doors:
Unlock all doors by turning the key, or
operating the keyless entry system
transmitter, keyless push start system
remote controller or request switch
once
– Driver Door:
Unlock all doors by turning the key, or
operating the keyless entry system
transmitter, keyless push start system
remote controller or request switch
twice (default setting)
• Auto Lock
– Manual Lock:
Disable the automatic door locking
function
– Speed Syncro:
Lock all doors when the vehicle speed
reaches 15 km/h (default setting)
• Auto Unlock
– Syncro Off:
Disable the automatic door unlocking
function (default setting for the vehicle
with the keyless push start system)
– IG-OFF Sync:
Unlock all doors when the key is
pulled out from the ignition switch or
the engine switch is pressed to
change the ignition mode to LOCK
(OFF) (default setting for the vehicle
without the keyless push start system)
64MS0-74E
2-52