Installation Of Child Restraint With Top Tether - MARUTI SUZUKI S-Cross Owner's Manual

1) Place the child restraint in the rear seat,
inserting the connecting bars to the
anchorages between the seat cushion
and the seatback.
EXAMPLE
68LM268
2) Use your hands to carefully align the
connecting bar tips with the anchor-
ages. Take care not to pinch your fin-
gers.
EXAMPLE
3) Push the child restraint toward the anchor-
ages so that the connecting bar tips are
partially hooked to the anchorages. Use
your hands to confirm the position.
EXAMPLE
4) Grasp the front of the child restraint and
push the child restraint forcefully to
latch the connecting bars. Check that
they are securely latched by trying to
move the child restraint system in all
directions, especially forward.
5) Attach the top tether strap referring to
"Installation of child restraint with top
tether" section below.
When you put your child in the child
restraint system, appropriately slide the
front seat forward not to touch a part of
your child's body.
54G184
BEFORE DRIVING
NOTICE
When installing a child restraint sys-
tem to the rear seat, adjust the front
seat position so that the front seat
does not interfere with the child
restraint system.
Installation of child restraint with
top tether
Front
54G185
Some child restraint systems require the
use of a top tether strap. Top tether anchor-
age brackets are provided in your vehicle at
the locations shown in the illustrations.
The number of the top tether anchorage
brackets provided in your vehicle depends
on the vehicle specification. Install the child
restraint system as follows:
EXAMPLE
68PM00247
2-34
64MS0-74E