Table of Contents
Advertisement
OTHER CONTROLS AND EQUIPMENT
Blower speed selector (2)
EXAMPLE
(2)
64MS052
The blower speed selector (2) is used to
turn on the blower and to select blower
speed.
If the "AUTO" switch (8) is pushed, the
blower speed will vary automatically as the
climate control system maintains the
selected temperature.
Air intake selector (3)
EXAMPLE
(a)
(b)
64MS053
5-27
Push the air intake selector (3) to change
between the following modes.
If the "AUTO" switch (8) is pushed, the air
intake will vary automatically as the climate
control system maintains the selected tem-
perature.
NOTE:
When you select the recirculated air mode,
the automatic operation system is deacti-
vated if you push the "AUTO" switch (8).
RECIRCULATED AIR (a)
When this mode is selected, outside air is
shut off and inside air is recirculated. This
mode is suitable when driving through an
area with polluted air such as a tunnel, or
when attempting to quickly cool down the
vehicle.
FRESH AIR (b)
When this mode is selected, outside air is
introduced.
The FRESH AIR and RECIRCULATED
AIR are selected alternately each time the
air intake selector is pushed.
NOTE:
If you select the RECIRCULATED AIR
(3)
position (a) for an extended period of time,
the air in the vehicle can become contami-
nated. Therefore, you should occasionally
select the FRESH AIR.
Air flow selector ("MODE") switch (4)
EXAMPLE
(c)
(d)
(e)
(4)
(f)
64MS054
Push the "MODE" switch (4) to change
among the following functions. The indica-
tion of the selected mode appears on the
display.
If the "AUTO" switch (8) is pushed, the air
flow will vary automatically as the climate
control system maintains the selected tem-
perature.
64MS0-74E
Advertisement
Table of Contents
