Table of Contents
Advertisement
OPERATING YOUR VEHICLE
Cruise Control
The cruise control system allows you to
maintain a steady speed without keeping
your foot on the accelerator pedal. The
controls for operating the cruise control
system are on the steering wheel.
You can use the cruise control system with
the following conditions:
• The gear position is in 3rd, 4th or 5th.
• The vehicle speed is about 40 km/h or
higher.
WARNING
To help avoid loss of vehicle control,
do not use the cruise control system
when driving in heavy traffic, on slip-
pery or winding roads, or on steep
downgrades.
3-21
Cruise Control switch
EXAMPLE
(2)
(1)
(3)
(4)
61MS416
(1) "CRUISE" switch
(2) "CANCEL" switch
(3) "RES +" switch
(4) "SET –" switch
Indicator lights
EXAMPLE
(5)
(6)
64MM02011
(5) Cruise indicator light
(6) "SET" indicator light
To Set Cruising Speed
1) Turn on the cruise control system by
pushing the "CRUISE" switch (1). When
the cruise indicator light (5) comes on,
you can set cruising speed.
2) Accelerate or decelerate to the desired
speed.
3) Push the "SET –" switch (4), "SET" indi-
cator light (6) comes on or appear on
the instrument cluster. Take your foot
off the accelerator pedal and the set
speed will be maintained.
WARNING
If the cruising speed is set by acci-
dent, you cannot decelerate or could
loose control of the vehicle. This
could lead to an accident, resulting in
severe injury or death.
Turn off the cruise control system
and check that the cruise indicator
light is off when the system is not in
use.
NOTE:
Established cruising speed may differ a lit-
tle from the speed meter indication
depending on the road conditions.
64MS0-74E
Advertisement
Table of Contents
