Ventilation; Bi-Sector; Heat; Heat And Defost - MARUTI SUZUKI S-Cross Owner's Manual

Temperature selector (1)
This is used to select the temperature by
turning the selector.
Blower speed selector (2)
This is used to turn on the blower and to
select blower speed by turning the selec-
tor.
Air flow selector (3)
EXAMPLE
(c)
(b)
(a) (e)
61MM0A019
This is used to select one of the functions
described below.
VENTILATION (a)
EXAMPLE
Temperature-controlled air comes out of
the center and side air outlets.
BI-LEVEL (b)
(d)
EXAMPLE
Temperature-controlled air comes out of
the floor outlets and cooler air comes out
of the center and side outlets. When the
temperature selector (1) is in the fully
COLD position or fully HOT position, how-
ever, the air from the floor outlets and the
air from the center and side outlets will be
the same temperature.
OTHER CONTROLS AND EQUIPMENT
HEAT (c)
EXAMPLE
61M0100
Temperature-controlled air comes out of
the floor outlets and the side outlets, also
comes out of the windshield defroster out-
lets and also comes slightly out of the side
defroster outlets.
HEAT & DEFROST (d)
61M0101
EXAMPLE
Temperature-controlled air comes out of
the floor outlets, the windshield defroster
outlets, the side defroster outlets and the
side outlets.
61M0102
64MS036
5-22
64MS0-74E