Head Restraints - MARUTI SUZUKI S-Cross Owner's Manual

BEFORE DRIVING
Seat position adjustment lever (1)
Pull the lever up and slide the seat.
Seatback angle adjustment lever (2)
Pull the lever up and move the seatback.
Seat height adjustment lever (3)
(if equipped)
Pull the lever up to raise the seat. Push the
lever down to lower the seat.
After adjustment, try to move the seat and
seatback forward and rearward to ensure
that it is securely latched.
2-21

Head Restraints

EXAMPLE
Head restraints are designed to help
reduce the risk of neck injuries in the case
of an accident. Adjust the head restraint to
the position which places the center of the
head restraint closest to the top of your
ears. If this is not possible for very tall pas-
sengers, adjust the head restraint as high
as possible.
WARNING
• Never drive the vehicle with the
head restraints removed.
• Do not attempt to adjust the head
restraint while driving.
NOTE:
It may be necessary to recline the seat-
back to provide enough overhead clear-
ance to remove the head restraint.
Front
EXAMPLE
80J001
To raise the front head restraint, pull
upward on the restraint until it clicks. To
lower the restraint, push down the restraint
while holding in the lock lever. If a head
restraint must be removed (for cleaning,
replacement, etc.), push in the lock lever
and pull the head restraint all the way out.
64MS163
64MS0-74E