Table of Contents
Advertisement
Installation with Lap-Shoulder Seat
Belts
NOTICE
If you can adjust the position of rear
head restraint, adjust the height of
the rear head restraint or remove it
for fitting the child restraint, as nec-
essary. However, if a booster cushion
not equipped with the head restraint
is fitted, the rear seat head restraint
should not be removed. If the rear
head restraint is removed for fitting
the child restraint, you need to install
it again after removing the child
restraint.
If the child restraint is fitted improp-
erly, a child sitting in it could be
injured in a crash.
NOTE:
Stow the removed head restraint in the lug-
gage compartment so it will not inconve-
nience the occupants.
ELR type belt
EXAMPLE
80JC021
Install your child restraint system accord-
ing to the instructions provided by the child
restraint system manufacturer.
Make sure that the seat belt is securely
latched.
Move the child restraint system in all direc-
tions to make sure it is securely installed.
When you put your child in the child
restraint system, appropriately slide the
front seat forward not to touch a part of
your child's body.
BEFORE DRIVING
Installation with a Lap Belt
EXAMPLE
Pull to tighten
Install your child restraint system accord-
ing to the instructions provided by the child
restraint system manufacturer.
To lengthen or tighten the belt, refer to the
"Lap-belt" item in this "Seat Belts and Child
Restraint Systems" section. After making
sure that the seat belt is securely latched,
try moving the child restraint system in all
directions, to make sure it is securely
installed. If you need to tighten the belt,
pull the free end of the webbing.
64MS0-74E
60G132
2-32
Advertisement
Table of Contents
