MARUTI SUZUKI S-Cross Owner's Manual page 43

To return the seat to the normal position,
follow the procedure below.
CAUTION
When returning the rear seatback to
the normal position, be careful that
your finger is not caught between the
lock and the striker.
NOTICE
When returning the rear seatback to
the normal position, make sure that
there is nothing around the striker.
Any foreign materials prevent the
seatback from being locked securely.
EXAMPLE
LOCK
UNLOCK
RED
64MS145
Raise the seatback until it locks into place.
(3)
(2)
(1)
EXAMPLE
64MS201
The rear seatback (3) will lock in two posi-
tions (1) and (2) (if equipped). You can lock
the rear seatback in position (2) to
increase the luggage compartment area.
After returning the seat, try to move the
seatback forward and rearward to ensure
that it is securely latched.
CAUTION
Do not put your hand into the rear
seatback lock opening, or your finger
may get caught and be injured.
CAUTION
After securing the rear seatback,
make sure that it is locked securely. If
it is not, red will appear beside the
release lever.
BEFORE DRIVING
NOTICE
• When returning the rear seatback
to the normal position, do not allow
any foreign material to enter the
lock opening. This may prevent the
seatback from being locked
securely.
• When returning the rear seatback
to the normal position, be sure to
handle it carefully by hand to avoid
any damage to the lock itself. Do
not push it by using some material
or by applying excessive force.
• As the lock is designed exclusively
for securing the rear seatback, do
not use it for any other purpose.
Incorrect use of it may cause dam-
age to the inside of the lock and
prevent the seatback from being
locked securely.
2-24
64MS0-74E