MARUTI SUZUKI S-Cross Owner's Manual page 173

NOTE:
If the "AUTO" on the display blinks, there is
a problem in the heating system and/or air
conditioning system. You should have the
system inspected by an authorised Maruti
Suzuki workshop.
NOTE:
• To find the temperature at which you are
most comfortable, start with the 25°C
(75°F) setting, for example.
• If you turn the temperature selector (1)
until "HI" or "LO" appears on the display,
the climate control system will operate at
maximum heating or cooling and blower
will run at full speed.
• To avoid blowing cold air in cold weather
or hot air in hot weather, the system will
delay turning on the blower until warmed
or chilled air is available.
• If your vehicle has been left in the sun
with the windows closed, it will cool
faster if you open the windows briefly.
• Even under automatic operation, you
can set individual selectors to the man-
ual mode. The manually selected func-
tions are maintained, and the other
functions remain under automatic opera-
tion.
• If the windshield and/or the front door
windows are fogged, push the defrost
switch (5) to turn on the defroster, or
push the "MODE" switch (4) to change
the air flow to the HEAT & DEFROST
position to defog the windows.
• To return the blower speed selector (2),
air intake selector (3), and air flow selec-
tor (4) to automatic operation, push the
"AUTO" switch (8).
EXAMPLE
(11)
(10)
64MS149
Be careful not to cover the interior tem-
perature sensor (10) located between the
steering wheel and the climate control
panel, or the solar sensor (11) located at
the top of the central part of the dash-
board. These sensors are used by the
automatic system to regulate temperature.
Manual operation
You can manually control the climate con-
trol system. Set the selectors to the
desired positions.
OTHER CONTROLS AND EQUIPMENT
EXAMPLE
NOTE:
If you need maximum defrosting:
• push the DEFROST switch to turn on the
defroster (the air conditioning system will
come on and the FRESH AIR mode will
be selected automatically),
• set the blower speed selector to HIGH,
• adjust the temperature selector to the
"HI" indication on the display, and
• adjust the side outlets so the air blows
on the side windows.
64MS091
5-30
64MS0-74E