Head Cooled/Feet Warmed Heating; Normal Cooling; Quick Cooling (Using Recirculated Air); Dehumidifying - MARUTI SUZUKI S-Cross Owner's Manual

Head cooled/Feet warmed heating

Select the BI-LEVEL and FRESH AIR, the
temperature selector to the desired tem-
perature position, and the blower speed
selector to the desired blower speed posi-
tion. Unless the temperature selector is in
the fully COLD position or fully HOT posi-
tion, the air that comes out of the center
and side outlets will be cooler than the air
that comes out of the floor outlets.

Normal cooling

Set the air flow selector to the VENTILA-
TION, the temperature selector to the
desired temperature position and the
blower speed selector to the desired blower
speed position, and push in the "A/C" switch
to turn on the air conditioning system. Set-
ting the blower speed selector to a higher
blower speed position increases cooling
efficiency.
You can switch the air intake selector to
either the FRESH AIR or RECIRCULATED
AIR as you desire. Choosing the RECIR-
CULATED AIR increases cooling effi-
ciency.

Quick cooling (using recirculated air)

The control settings are the same as for
normal cooling except selecting
RECIRCULATED AIR and the highest
blower speed.
NOTE:
• If you select the RECIRCULATED AIR
for an extended period of time, the air in
the vehicle can become contaminated.
Therefore, you should
select the FRESH AIR.
• If your vehicle has been left in the sun
with the windows closed, it will cool
faster if you open the windows briefly
while you operate the air conditioner with
the air intake selector at the FRESH AIR
and the blower at high speed.

Dehumidifying

Set the air flow selector to a desired air
flow selector position, the temperature
selector to the desired temperature posi-
tion and the blower speed selector to the
desired blower speed position. Also select
the FRESH AIR and push in the "A/C"
switch to turn on the air conditioning sys-
tem.
NOTE:
Because the air conditioner dehumidifies
the air, turning it on will help keep the win-
dows clear, even when blowing heated air
using the DEFROST or
DEFROST functions.
the
OTHER CONTROLS AND EQUIPMENT
occasionally
EXAMPLE
NOTE:
If you need maximum defrosting:
• select the DEFROST and FRESH AIR,
• set the blower speed selector to HIGH,
• adjust the temperature selector to the
HOT end,
HEAT &
• push in the "A/C" switch, and
• adjust the side outlets so the air blows
on the side windows.
64MS091
5-24
64MS0-74E