Table of Contents
Advertisement
BEFORE DRIVING
Windshield Wipers
EXAMPLE
64MS063
To turn the windshield wipers on, move the
lever down to one of the three operating
positions. In the "INT" position, the wipers
operate intermittently. The "INT" position is
very convenient for driving in mist or light
rain. In the "LO" position, the wipers oper-
ate at a steady low speed. In the "HI" posi-
tion, the wipers operate at a steady high
speed. To turn off the wipers, move the
lever back to the "OFF" position.
Move the lever up and hold it to the "MIST"
position, the windshield wipers will turn on
continuously at low speed.
2-75
EXAMPLE
64MS064
If the lever is equipped with the "INT TIME"
control, turn the control forward or rear-
ward to adjust the intermittent wiper opera-
tion to the desired interval.
Windshield Wipers with Rain Sens-
ing Function (if equipped)
EXAMPLE
MIST
OFF
AUTO
LO
HI
64MS065
Press the engine switch to change the igni-
tion mode to "ON". To turn the rain-sensing
wipers on, move the lever down to one of
the three operating positions. In the
"AUTO" position (if provided), the wipers
automatically operate when the wiper sys-
tem senses rain or snow. In the "LO" posi-
tion, the wipers operate at a steady low
speed. In the "HI" position, the wipers
operate at a steady high speed. To turn off
the wipers, move the lever back to the
"OFF" position.
Move the lever up and hold it to the "MIST"
position; the wipers will operate continu-
ously at low speed for as long as you hold
the lever in the "MIST" position.
EXAMPLE
64MS066
If the control lever has on "AUTO" position,
you can change the system's sensitivity to
rain/snow by turning the knob of the con-
trol lever forward for increased sensitivity
or rearward for decreased sensitivity.
64MS0-74E
Advertisement
Table of Contents
