Turn Signal Control Lever; Normal Turn Signal; Lane Change Signal; Headlight Leveling Switch (If Equipped) - MARUTI SUZUKI S-Cross Owner's Manual

BEFORE DRIVING
Headlight Leveling Switch
(if equipped)
EXAMPLE
80JM040
Level the headlight beam according to the
load condition of your vehicle by turning
this switch. The chart below shows the
appropriate switch position for different
vehicle-load conditions.
Vehicle Load Condition Switch Position
Driver only 0
Driver + 1 passenger
0
(in front seat)
Driver + 4 passengers,
1
no cargo
Driver + 4 passengers,
2
cargo added
Driver + full cargo 3
2-73

Turn Signal Control Lever

EXAMPLE
WARNING
To avoid possible injury, do not oper-
ate controls by reaching through the
steering wheel.
Turn Signal Operation
With the ignition switch in the "ON" position
or the ignition mode "ON", move the lever
up or down to activate the right or left turn
signals.

Normal turn signal

EXAMPLE
65D611
Move the lever all the way upward or
downward to signal. When the turn is com-
pleted, the signal will cancel and the lever
will return to its normal position.

Lane change signal

EXAMPLE
Move the lever part-way in the direction to
turn and hold it there.
60MK013
60MK014
64MS0-74E