Table of Contents
Advertisement
OPERATING YOUR VEHICLE
How to Use Rearview Camera
1) Turn the ignition switch to the "ON"
position or press the engine switch to
change the ignition mode to "ON".
2) Shift the gearshift lever in the "R" posi-
tion.
• The display automatically shows the
view behind the vehicle.
• When the gearshift lever is shifted
from "R" to another gearshift lever
position, the display returns to the
previous display.
NOTE:
• The colors of objects on the rearview
camera may differ from the actual object
colors.
• The rearview camera display has first
priority in any display mode. However,
the rearview camera display does not
show the rear view while the system is
initializing.
3-29
Display Range of Rearview Camera
The rearview camera display shows the
area behind the rear end of the tailgate.
The display cannot show objects which are
close to the bumper or under the bumper.
The rearview camera display cannot show
obstacles which are higher than the cam-
era. Upper parts of tall objects such as
road signs cannot be viewed on the dis-
play.
EXAMPLE
(1)
61MM0A015
EXAMPLE
(1)
61MM0B012
(1) Display range
NOTE:
• Images shown on the display from the
rearview camera are reversed images
(mirror images).
• The colors of objects on the rearview
camera may differ from the actual object
colors.
• The rearview camera display may be dif-
ficult to see under the following condi-
tions,
but
this
is
not
a
system
malfunction.
– In dark areas, on a rainy day or at
night.
– When the temperature around the lens
is too high/low, or the camera is wet
such as on a rainy day or during peri-
ods of high humidity (dew condensa-
tion may occur on the camera lens).
– When a foreign object such as mud or
a drop of water is stuck around the
camera lens.
– When strong light directly enters the
camera (vertical lines may be seen on
the display).
– Under fluorescent light. (The display
may flicker.)
– When the outside temperature is low
(the image on the display may be
darkened).
64MS0-74E
Advertisement
Table of Contents
