MARUTI SUZUKI S-Cross Owner's Manual page 161

1) Pick up the towing hook (1), jack handle
(A) and wheel brace (B) stowed in the
luggage compartment.
EXAMPLE
(C)
(A)
64MM05007
2) Remove the cover on front bumper (C)
by using a jack handle (A) covered with
a soft cloth as shown in the illustration.
NOTE:
Do not use excessive force as it may dam-
age the cover strap.
EXAMPLE
(1)
64MM05008
3) Screw the towing hook (1) by hand.
NOTE:
We recommend to fasten the cover with
tape to prevent damage during towing.
EXAMPLE
(B)
(1)
64MM05009
OTHER CONTROLS AND EQUIPMENT
4) To tighten the towing hook (1), turn it
clockwise by using a wheel brace (B)
until the hook (1) is securely installed.
To remove the towing hook (1), reverse the
procedure used to install the towing hook.
NOTICE
To prevent damage to the vehicle,
never use the towing hook (1) for
trailer / train shipping and sea ship-
ping purposes.
Rear
EXAMPLE
The frame hook (2) is provided on the rear
of the vehicle for use in emergency situa-
tions and sea shipping purposes only.
(2)
64MS140
5-18
64MS0-74E