Phone Registration; Receiving A Call; Rejecting A Call; Adjusting The Listening/Ring/Call Or Ringtone Volume - MARUTI SUZUKI S-Cross Owner's Manual

Suzuki sx4 s-cross
Hide thumbs Also See for S-Cross:
Table of Contents

Advertisement

Phone registration

To use the hands-free function with this
unit, it is required to register the phone
in advance.
NOTE:
• Up to 5 phones can be registered.
• To set up a new phone, disconnect the
audio player from the unit. Connect the
audio player again after phone setup is
completed if necessary.
• When failed to establish the pairing
within 120 seconds, the connecting
operation will be canceled. Please try
again or refer to the manual of the phone
in use for how to establish the pairing
with the phone.
®
1) Press the Bluetooth
setup button (4).
®
The Bluetooth
setup menu will be dis-
played.
2) Turn
the
TUNE
FOLDER
PUSH
SOUND knob (1) to select "Setup Blue-
tooth", and press the knob (1) to deter-
mine the selection.
3) Turn
the
TUNE
FOLDER
PUSH
SOUND knob (1) to select "Pairing",
and press the knob (1) to determine the
selection.
4) Select "CAR AUDIO" from the Blue-
®
tooth
menu of the phone and establish
the pairing.
Refer to the manual of the phone in use
for further information.
5) Enter the Passkey displayed on the unit
to the phone. (For phones with Blue-
®
tooth
version 2.1 or above passkey
input is not required.)
6) Press the On Hook button (6).
NOTE:
• When selecting "Go Back", the previous
menu will be displayed.
• When additionally registering a phone,
operate the same step from 1).

Receiving a call

Press the Off Hook button (5) to receive a
call.
Ending a call
Press the On Hook button (6) to end a call.
Rejecting a call (only for supported
models)
Press the On Hook button (6) to reject a
incoming call.
Adjusting the listening volume
• Turn the VOL PUSH POWER knob (2)
during a call.
Turning it clockwise increases the vol-
ume;
turning
it
counterclockwise
decreases the volume.
• Press the VOL switch (7) during a call.
Pressing "+" of the switch increases the
volume, pressing "-" of the switch
decreases the volume.
Adjusting the ring volume
• Turn the VOL PUSH POWER knob (2)
while a call coming in.
Turning it clockwise increases the vol-
ume;
turning
it
counterclockwise
decreases the volume.
OTHER CONTROLS AND EQUIPMENT
• Press the VOL switch (7) during a call.
Pressing "+" of the switch increases the
volume, pressing "-" of the switch
decreases the volume.
Adjusting the call or ringtone volume
Follow the instructions below to adjust the
call or ringtone volume.
®
1) Press the Bluetooth
setup button (4).
®
The Bluetooth
setup menu will be dis-
played.
2) Turn
the
TUNE
FOLDER
SOUND knob (1) to select "Setup Tele-
phone", and press the knob (1) to deter-
mine the selection.
3) Turn
the
TUNE
FOLDER
SOUND knob (1) to select "Sound Set-
ting", and press the knob (1) to deter-
mine the selection.
4) Turn
the
TUNE
FOLDER
SOUND knob (1) to select "Call Vol-
ume" or "Ringtone Volume", and press
the knob (1) to determine the selection.
The current call or ringtone volume will
be displayed.
5) Turn
the
TUNE
FOLDER
SOUND knob (1) to select desired call
or ringtone volume, and press the knob
(1) to determine the selection.
NOTE:
When selecting "Go Back", the previous
menu will be displayed.
PUSH
PUSH
PUSH
PUSH
5-56
64MS0-74E

Advertisement

Table of Contents
loading

Table of Contents