Seat Belt Inspection; Child Restraint Systems; Infant Restraint; Booster Seat - MARUTI SUZUKI S-Cross Owner's Manual

Seat Belt Inspection

EXAMPLE
65D209S
Periodically inspect the seat belts to make
sure they work properly and are not dam-
aged. Check the webbing, buckles, latch
plates, retractors, anchorages, and guide
loops. Replace any seat belts which do not
work properly or are damaged.
WARNING
Be sure to inspect all seat belt
assemblies after any collision. Any
seat belt assembly which was in use
during a collision (other than a very
minor one) should be replaced, even
if damage to the assembly is not
obvious. Any seat belt assembly
which was not in use during a colli-
sion should be replaced if it does not
function properly, it is damaged in
any way or the seat belt pretension-
ers were activated (that is, if the front
air bags were activated).

Child Restraint Systems

EXAMPLE
60G332S
Infant restraint - rear seat only
EXAMPLE
80JC007
BEFORE DRIVING
Child restraint
EXAMPLE

Booster seat

EXAMPLE
MARUTI SUZUKI highly recommends that
you use a child restraint system to restrain
infants and small children. Many different
types of child restraint systems are avail-
able; make sure that the restraint system
you select meets applicable safety stan-
dards.
64MS0-74E
80JC016
80JC008
2-30