Table of Contents
Advertisement
BEFORE DRIVING
Brightness Control
EXAMPLE
(1)
61MM0A156
When the ignition switch is turned to the
"ON" position or the engine switch is
pressed to change the ignition mode to
"ON", the instrument cluster lights come
on.
Your vehicle has a system to automatically
dim the brightness of the instrument panel
lights when the position lights or headlights
are on.
You can change the brightness of the
instrument panel lights regardless of
whether the position lights or headlights
are off or on.
To increase the brightness of the instru-
ment panel lights, turn the indicator selec-
tor knob (1) clockwise.
2-47
To reduce the brightness of the instrument
panel lights, turn the indicator selector
knob (1) counterclockwise.
WARNING
If you attempt to adjust the bright-
ness of the instrument panel lights
while driving, you could lose control
of the vehicle.
NOTE:
• If you do not turn the knob for more than
5 seconds while activating the bright-
ness control, the brightness control dis-
play will be canceled automatically.
• When you reconnect the battery, the
brightness of the instrument panel lights
will be reinitialized. Readjust the bright-
ness according to your preference.
NOTE:
If you select the high brightness level when
the position lights or headlights are on, the
instrument panel lights are not dimmed.
Information Display
The information display is shown when the
ignition switch is in the "ON" position or the
ignition mode is "ON".
(A)
(B)
(C)
(D)
(F)
(E)
(1)
EXAMPLE
64MM02013
(1) Information display
EXAMPLE
(3)
64MM02014
(2) Indicator selector knob
(3) Trip meter selector knob
64MS0-74E
(2)
Advertisement
Table of Contents
