If Master Warning Light Blinks And The Engine Cannot Be Started - MARUTI SUZUKI S-Cross Owner's Manual

Suzuki sx4 s-cross
Hide thumbs Also See for S-Cross:
Table of Contents

Advertisement

OPERATING YOUR VEHICLE
Caution when stopping the engine with
turbocharger
When stopping the engine after climbing or
high speed driving, let the engine idle for
about one minute or more (if it is not pro-
hibited) to cool down the turbocharger and
engine oil. This is to prevent the engine oil
from
over-deteriorating.
Deteriorated
engine oil will damage the bearings of the
turbocharger.
Restarting engine after fuel-empty stop
If the engine stops and the low fuel warn-
ing light and the malfunction indicator light
come on, use the following procedure:
1) Fill the fuel tank.
2) Press the engine switch to change the
ignition mode to "ON" for 5-10 seconds
to feed fuel.
3) Perform above engine starting proce-
dure to start the engine.
If the malfunction indicator light still comes
on after the engine started, there may be
some problem with the engine. Ask your
authorised Maruti Suzuki workshop to
have the engine inspected.
If the master warning indicator light
blinks and the engine cannot be started
Your keyless push start system remote
controller may not be sensed as being
within the interior workable area. Try again
after ensuring that you have the remote
controller with you. If the engine still can-
not be started, the battery of the remote
controller may be discharged. You must
3-13
then use the following method to be able to
start the engine.
EXAMPLE
(1)
(2)
58MST0302
1) Make sure the parking brake is set fully.
2) Shift to "N" (Neutral) and fully depress
the clutch pedal. Hold the clutch and
brake pedals fully depressed.
3) The "PUSH START SWITCH" message
will appear on the information display in
the instrument cluster. Press the engine
switch (1).
4) Within about 10 seconds of blinking of
the master warning indicator light in the
instrument cluster, touch the engine
switch with the lock button end of the
remote controller (2) for about 2 sec-
onds.
NOTE:
• If you still cannot start the engine after
several
attempts
using
the
above
method, there may be a problem else-
where, such as a low battery. Contact
your authorised Maruti Suzuki workshop
for inspection.
• The immobilizer/keyless push start sys-
tem warning light will come on for about
5 seconds while the master warning indi-
cator light is blinking. In addition, the
information display will show a certain
message during this time. Refer to
"Information Display" in the "BEFORE
DRIVING" section for details.
• You may customize the system to cause
the interior buzzer to sound once for the
remote controller out of sensing range
warning. Please contact an authorised
Maruti Suzuki workshop for the customi-
zation.
• If the battery of the remote controller is
about to be completely discharged, a
message warning this will appear on the
information display when the ignition
mode is changed to "ON" by pressing
the engine switch. For details on replac-
ing the battery, refer to the "Keyless
Push Start System Remote Controller" in
the "BEFORE DRIVING" section.
64MS0-74E

Advertisement

Table of Contents
loading

Table of Contents