To Change Speed Temporarily; To Change Cruising Speed; Cancellation Of The Cruise Control; Using The “Res +” Switch Or The “Set –” Switch - MARUTI SUZUKI S-Cross Owner's Manual

To Change Speed Temporarily

When the cruising speed is maintained,
you can temporarily accelerate or deceler-
ate.
To accelerate, depress the accelerator
pedal. When you take your foot off the
pedal, your vehicle will return to the set
speed.
To decelerate, depress the brake pedal.
The set speed will be canceled and "SET"
indicator light will go off.
To resume the previously set speed, push
the "RES +" switch (3) and turn on the
"SET" indicator light again when vehicle
speed is above 40 km/h. The vehicle will
accelerate to the previously set speed and
maintain its speed.

To Change Cruising Speed

Using the accelerator pedal
To reset at a faster cruising speed, accel-
erate to the desired speed using the accel-
erator pedal and push the "SET –" switch
(4). The new speed will be maintained.
Using the brake pedal
To reset at a slower cruising speed, decel-
erate to the desired speed using the brake
pedal and push the "SET –" switch (4). The
new speed will be maintained.
NOTE:
When the brake pedal is depressed, the
"SET" indicator light goes off until the cruis-
ing speed is reset.
Using the "RES +" switch or the "SET –"
switch
To reset at a faster cruising speed, press
repeatedly or hold push the "RES +" switch
(3). Vehicle speed will steadily increase.
When you release the switch, the new
speed will be maintained.
To reset at a slower cruising speed, press
repeatedly or hold push the "SET –" switch
(4) until the vehicle has slowed to the
desired speed, then release the switch.
The new speed will be maintained.
NOTE:
You can adjust the set speed by approxi-
mately 1.6 km/h by pushing the "RES +"
switch (3) or the "SET –" switch (4) quickly.
OPERATING YOUR VEHICLE

Cancellation of the Cruise Control

The "SET" indicator light will go off and the
cruise control will be canceled temporarily
with following conditions:
• Push the "CANCEL" switch (2).
• Depress the brake pedal.
• Depress the clutch pedal.
• The vehicle speed falls more than about
20 percent from the set speed.
• Any time the vehicle speed falls below
40 km/h.
To resume the previously set speed, push
the "RES +" switch (3) and turn on the
"SET" indicator light. Besides, the vehicle
speed has to be above 40 km/h when the
vehicle is not in the above conditions.
To turn off the cruise control system, push
the "CRUISE" switch (1) and check that the
cruise indicator light is off.
Also, if the malfunction indicator light in the
instrument cluster comes on or blinks, the
cruise control system will be turned off.
NOTE:
If you turn off the cruise control system, the
previously set speed in the memory is
cleared. Reset your cruising speed again.
64MS0-74E
3-22