Return Code When Refuse - Yealink SIP-T2 Series Administrator's Manual

Return code when refuse defines the return code and reason of the SIP response
message for the refused call. The caller's phone LCD screen displays the reason
according to the received return code. Available return codes and reasons are:
404 (Not found)

480 (Temporarily not available)

486 (Busy here)

Procedure
Return code for refused call can be configured using the configuration files or locally.
Configuration File
Local
Details of the Configuration Parameter:
features.normal_refuse_code
Description:
Configures a return code and reason of SIP response messages when the IP phone
rejects an incoming call. A specific reason is displayed on the caller's phone LCD
screen.
404-No Found
480-Temporarily not available
486-Busy here
If it is set to 486 (Busy here), the caller's phone LCD screen will display the message
"Busy here" when the callee rejects the incoming call.
Web User Interface:
Features->General Information->Return Code When Refuse
<y0000000000xx>.cfg
Web User Interface
Parameter
Configuring Basic Features
Specify the return code and the
reason of the SIP response
message when refusing a call.
Parameter:
features.normal_refuse_code
Specify the return code and the
reason of the SIP response
message when refusing a call.
Navigate to:
http://<phoneIPAddress>/servlet
?p=features-general&q=load
Permitted Values
404, 480 or 486
Default
486
167