Removing The Battery Box - JLG E600 Service And Maintenance Manual

SECTION 3 - CHASSIS & TURNTABLE

Removing the Battery Box

To remove the battery box, perform the following steps.
1. Pull the pull ring to disconnect the batteries at the
battery disconnect beside the box.
2. Remove the two attachment bolts that secure the
battery box to the turntable.
3-48
NOTE: The battery box and batteries complete weigh
3. Using a forklift, lift the battery box up enough to
Figure 3-29. Battery Cable Routing
– JLG Lift –
approximately 668 pounds (303 kg).
clear the notch on the battery box rails and remove
the battery box from the machine.
3121813