JLG E600 Service And Maintenance Manual page 192

SECTION 6 - JLG CONTROL SYSTEM
FSW1 ...
FSW2 ...
DRIVE CUTOUT ...
ELEV. CUTOUT ...
FUNC. CUTOUT ...
BRAKES ...
MAN.RELEASE ...
TILT ...
DATALOG
MAX.TEMP ...
MIN.TEMP ...
MAX.BATTERY ...
ON ...
DRIVE ...
PUMP ...
LIFT ...
SWING ...
TELE ...
RENTAL ...
ERASE RENTAL
YES:ENTER, NO:ESC
VERSIONS
POWER ...
PLATFORM
GROUND
POSITILT
ANALYSER ...
6-26
Table 6-7. Diagnostic Menu Descriptions
Displays footswitch status
NOTE: FSW1 is wired to the power module
Displays footswitch status
NOTE: FSW2 is wired to the platform module
Displays drive cutout switch status
Displays elevation cutout switch status
Displays function cutout switch status
Displays brake pressure switch status
Displays manual brake release switch status
Displays measured vehicle tilt
The first value indicates tilt in the forward/ reverse direction (pitch)
The second value indicates tilt in the left/ right direction (roll)
Displays maximum measured heatsink temp.
Displays minimum measured heatsink temp.
Displays maximum measured battery voltage
Displays total controller on (EMS) time
Displays total controller drive operation time
Displays total controller pump running time
NOTE: includes all boom functions, steer and brake release
Displays total controller lift operation time
Displays total controller swing operation time
Displays total controller tele operation time
Displays total controller operation time
NOTE: can be reset
Not available at password level 2
ENTER resets rental datalog time to zero
Displays power module software version
Displays platform module software version
Displays ground module software version
Displays positrac/tilt module software version
Displays Analyzer software version
– JLG Lift – 3121813